Synology QuickConnect blocked on « Connection in progress... » : my solution

You share your photos from a Synology NAS with Synology Photos, and your customers reply that the link « spins in the vacuum » on « Connection in progress... » ? Here's what I've seen, what hasn't worked, and the solution I've chosen. This article is the technical part of Share photos after shooting.

The symptom

The sharing links generated via QuickConnect worked on my local network, but remained blocked on « Connection in progress... » from outside. The trigger: I had closed the 5001 port of my box, to stop exposing the NAS connection page on the Internet. A good security practice, but that broke QuickConnect silently.

What I checked, no result

  • QuickConnect relay is enabled;
  • the relevant applications are allowed in QuickConnect;
  • DSM firewall and automatic blocking do not block anything;
  • network, DNS, TLS profile and time synchronization are correct;
  • newspapers report failure of tunnel request (« tunnel request fail »).

First fix: restart QuickConnect

In Control Panel, section External access, QuickConnect tab: disable and reactivate the service. After a network change (closed port, modified box), QuickConnect must re-register. This is enough sometimes, and it is the first thing to try.

Why I'm not content

For professional use, depending on QuickConnect is a problem: the state of the service does not depend on me. Synology forums also recommend using their own domain name for pro use. That's what I did.

The solution chosen: a Cloudflare tunnel and a subdomain of mine

The principle of a Cloudflare tunnel is that the NAS itself establishes an outgoing connection to Cloudflare. No port is open on the box. Visitors arrive on a subdomain of my own domain, which I reserve to share pages, not to the NAS administration interface. The free plan is sufficient for this use.

The big steps, without going into the details of my installation:

  1. have a domain name whose DNS area is managed at Cloudflare;
  2. create a tunnel in the Cloudflare Zero Trust space;
  3. running the cloudflared connector on the NAS (e.g. with Docker);
  4. associate a subdomain with the tunnel, pointing to the Synology Photos sharing service;
  5. test a sharing link from an external network, for example in 4G.

Never publish the tunnel token or QuickConnect identifier or IP address of your box.

The limits to know, honestly

  • Sovereignty: Cloudflare is an American company, and it completes HTTPS encryption at its level. The traffic of your photos is thus passing in plain light to him. Your photos are stored at home, but it's not an end-to-end encryption. At this point, I rely on the password of each link and on the fact that only the sharing pages are displayed.
  • Conditions of use: Cloudflare deleted its former content clause in 2023 « non HTML », but some sources still report restrictions for large files and video on the free plan. I can't confirm this for a photo sharing use: check the conditions before you start.

What I remember

  • closing a port to protect itself can break QuickConnect without a clear message;
  • After a network change, cut and then restart QuickConnect;
  • for professional use, a domain is better than a service on which one depends.

Are you an individual and just want to receive your photos by a private link? Find the full approach in The article on photo sharing, or do not hesitate to contact me.

Are you professional and want to exchange links between our sites or collaborate?

Sources

📸 Need a photographer?

Trust your photos to an image professional to value your property as it deserves. Whether it's for a sale or a rental, I help you capture the attention and make the difference from the first image.

👇 Contact me now for a quick and personalized quote👇

Together, make your project a success: